Installation instructions and materials required for installing a telescoping flagpole:

1. PVC sleeve (included with pole)
2. Three 60 lb. bags of concrete mix (approximately)
3. Measuring tape or yard stick
4. Contractor's level
5. Small rock or course gravel, container for mixing concrete

Dig a hole 28" deep by 18" round and place 6" to 8" of small gravel for drainage on the bottom of the hole. Insert bolt in sleeve, place sleeve in hole. Surround sleeve with cement, place level inside of the sleeve to see that it is level. Set and cure overnight.

*Detailed installation instructions are included with the flagpole.